This document contains information about D-Link DFE-690TXD CardBus PC Card 
driver for Macintosh Power Mac series.  We urge you to read this document 
to gain some understanding of this product. This document address the 
following topics:

*** The D-Link DFE-690TXD CardBus PC Card driver 
    does not support the HOT-SWAP functionality of a PC Card.
    Thus you must plug the PC Card into your system before booting and should not 
    remove the PC Card from your system before shuting down. PLEASE DO NOT 
    HOT-SWAP THE PC CARD WHEN YOUR MAC SYSTEM IS RUNNING.

1. Adapter requirement for PC Card
2. Software Installation
3. Setting up Open Transport
4. Setting up the TCP/IP

1. Adapter requirement for PC Card
1.1 The NIC on your PC Card must be D-Link DFE-690TXD CardBus PC Card 
      series and the Vendor ID musb be 1186 and the Device ID must be 1340. 
       * You can contact your PC Card provider to get the Vendor ID and Device ID of your
         PC Card. 
1.2 If the Vendor ID and Device ID is not 1186,1340, please contact your PC Card provider
      to get the driver for your PC Card or follow the following steps to patch our driver to 
      work with your PC Card.
      - Get a binary editor to edit the driver.
        *** You can use "General Edit Lite" editor You can download "General Edit Lite" from 	
              ftp://physgi.phy.ncku.edu.tw/pub/mac/editor.
      - Use this editor to open the driver file "DFE690".
      - Select "Unlock Data" from the "View" menu item to unlock data of the driver file to 
         enable the editor to modify the driver file.
      - Click on the lower frame to activate the lower frame.
      - Replace all the pci1186,1340 items with your pcixxxx,yyyy whree xxxx is the Vendor
        ID and yyyy is the Device ID of your PC Card by using the "Replace" function provided
        in the "Replace" menu item in the  "Find" menu item. 
      - Save the driver file.
      note: "Quadrivio General Edit Lite" is a product of Quadrivio corporation. Please read
             the text file within the "Quadrivio General Edit Lite". You can contact Quadrivio 
             corporation for more information.

2. Software Installation
2.1 Double-click the "Installer" icon in the "DFE-690TXD Driver for Mac OS" folder. 
      The installer program examines your computer and installs the appropriate 
      driver according to your selection.

3. Setting up the AppleTalk Control Panel
3.1 Select the "Control Panels" from the Apple Menu.
3.2 Select "AppleTalk" from the Control Panels submeu. 
3.3 Click the "Connect via:" dropdown list box to show available communication
		    connections.
3.4 Select the slot where the adapter is installed.
3.5 Close the AppleTalk control panel. A dialog box will appear asking whether you 
		    want to save changes. Click the "Save" button.

4. Setting up the TCP/IP
4.1 Select "Control Panels" from the Apple Menu.
4.2 Select "TCP/IP" from te Control Panels submenu.
4.3 Click the "Connect via:" dropdown list box to show available communication 
		    connections.
4.4 Select the slot where the adapter is installed.
4.5 Close the TCP/IP control panel. A dialog box will appear asking whether you want
		    to save changes. Click the "Save" button.